Capturing Windmill Sunset 2:1 Aspect is not an easy settings combination to figure out on your camera. It is counter-intuitive to say the least and a cell phone isn’t going to catch this image. The layers of ridges , the sails blur, the rising horizon (setting sun)🤔
Montana skies on the right. Wyoming Skies on the left. Living on the Montana/Wyoming border has it’s little spiffs lolol.
There are 3 things you have to set to run a camera on manual:
1: Your first priority here is to catch a blurred windmill. The only way to do that is to set your shutter speed to a very long 1/15th of a second to facilitate the blur. That makes a longer time for the windmill sail to blur the whole disk. Your kind of stuck with this first setting priority.
2: So then you have a VERY bright sun on the left of the frame. …. …. Your f-stop will reduce light so automatically you turn it all the way to the highest number the lens will go (this was f64). I was about 300 yards out from the windmill. 800mm telephoto.
3: You will still have to turn the last thing you have to set to run the camera on Manual. ISO or Camera sensitivity . I would think not many cameras can do this because they don’t have enough built in dynamic range . I use ISO 80 for this and the camera will go down to 50. Yours will probably go down to ISO 100.
This was done WITHOUT a glass neutral density filter in front of the camera but that might help some of you that cant turn your ISO any lower.
Disclaimer:
Now you know everything I know about trying to take one of these except, don’t do this with a DSLR camera as the direct light path to your eye will blind you. I look at a video screen to do this using mirrorless cameras. Also, make sure your using a camera that can take this (is rated for it). a direct sun through a long lens can and will melt some sensors in cameras out there. Don’t melt your camera please.
Location: Bliss DInosaur Ranch, Wyoming/Montana borderlands
Title: Windmill Sunset 2:1 Aspect